LINK 330
Wet-Offset / Flexo / Cold-Stamping / Rotary Die-cut / Rotary Hot-Stamping / Reverse-side Printing / Flat-Screen / Flat-Bed Hot-Stamping Embossing / Flat-Bed Die-Cut / Un-Re-Winder

Unwind + In-Feeder Unit

Max Paper Width：350mm 
Max Paper Diameter：700mm
Air shaft diameter：76mm 
  • Web guide
  • Including main controller system and remote support function
  • 2nd-pass system
Option：​
  1. Dust suction device
  2. Silicon anti-glue device
  3. Slitting unit with 2 slitter + ​Waste remove suction device
  4. Dust remove roller system
  5. Digital printing device space
  6. CORONA device

Wet-Offset Printing Unit

Max Speed：200 RPM
Max Paper Width：350mm 
Max Print Width：330mm 
Print Length：Semi-Rotary 180mm~360mm
Plate Thickness：0.15mm
Plate Size：335*423.5mm^2
Blanket Thickness：1.95mm
  • X,Y,T register servo motor control system​
  • Water-cooling system
  • Variable speed control of Ink roller and water roller
  • Servo-motorize pressure adjust system between plate roller, blanket roller and pressure roller​
  • 7 inch operating panel
Option：
  1. Remote ink key control system
  2. Auto washing function

Flexo/Varnish Unit

Max Speed：200 RPM
Max Paper Width：350mm 
Max Print Width：330mm
Print Length：
  1. Semi-Rotary：30mm~450mm
  2. Full-Rotary：558.8mm
Plate Thickness：1.7mm or 0.95mm
Double Side Tape Size：0.12mm 
Plate Ratio：1.7mm(99.045%),0.95mm(98.223%)
  • X,Y,T register servo motor control system
  • Peristaltic pumps system
  • 7 inch operating panel
Option：
  1. ​Magnetic Cylinder

Cold-Stamping Unit<Coming soon>

Max Foil Width：350mm
Max Foil Diameter：400mm
Cold-Stamping Width：330mm
  • 7 inch operating panel
Option：
  1. ​Friction Shaft：ϕd：25mm，Width：25mm
  2. Friction Shaft：ϕd：76mm，Width：25mm
  3. Friction Shaft：ϕd：76mm，Width：50mm
  4. Air Shaft：ϕd：25mm
  5. Air Shaft：ϕd：76mm

Rotary Die-Cut Unit

Max Speed：200 RPM
Max Paper Width：350mm 
Max Die-Cut Width：330mm
Die-Cut Length：
  1. Semi-Rotary：30mm~450mm
  2. Full-Rotary：558.8mm
Plate Thickness：0.44T
Gear Teeth：176TT
  • X,Y,T register servo motor control system
  • Digital gap control system
  • 7 inch operating panel
Option：
​

Rotary Hot-Stamping Unit

Max Speed：200 RPM
Max Paper Width：350mm 
Max Print Width：330mm 
Max Foil Width : 350mm
Max Foil Diameter：300mm
Print Length：Semi-Rotary 180mm~360mm
Plate Thickness：1T
  • X,Y,T register servo motor control system
  • Electric heating system
  • Digital gap control system​
  • Foil saving system by two length setting
  • 7 inch operating panel
Option：
  1. ​Friction Shaft：ϕd：25mm，Width：25mm
  2. Friction Shaft：ϕd：76mm，Width：25mm
  3. Friction Shaft：ϕd：76mm，Width：50mm
  4. Air Shaft：ϕd：25mm
  5. Air Shaft：ϕd：76mm
  6. Foil register control system

Flat Screen Unit <Coming soon...>

Max Speed：100 prints per minute
Max Paper Width：350mm 
Max Print Width：330mm
Max Print Length：360mm
Frame Size： 400*460 mm^2
  • Servo-motorize squeegee and wiper position/Pressure control system
  • X direction register servo motor control system
  • 7 inch operating panel
Option：
  1. Screen Frame

Flat Hot-Stamping / Embossing Unit

Max Speed：300RPM
Max Paper Width：350mm ​
Max Tool Size：350*400 mm^2 
Max Foil Diameter：300mm
Max Foil Width：350mm
Max Stamping Area：330 * 360 mm^2
Tool Thickness：7mm (Option)
Embossing male plate：1mm (Option)
  • X direction register servo motor control system
  • Electric Heating system
  • Digital pressure control system​
  • MultiPos function
  • Two foil path function
  • Foil saving function
  • 7 inch operating panel 
Option：
  1. Friction Shaft：ϕd：25mm，Width：25mm
  2. Friction Shaft：ϕd：76mm，Width：25mm
  3. Friction Shaft：ϕd：76mm，Width：50mm
  4. Air Shaft：ϕd：25mm
  5. Air Shaft：ϕd：76mm
  6. Foil register control system

Flat Die-Cut Unit

Max Speed：300RPM
Max Paper Width：350mm 
Max Tool Size：350*400 mm^2
Max Die-Cut Area：330 * 360 mm^2
Tool Thickness：( on request )
  1. Magnetic Dies
  2. Teel Rule Dies
 
  • X direction register servo motor control system
  • Digital pressure control system​
  • MultiPos function
  • ​7 inch operating panel 
Option：
  1. Magnetic plate
  2. Customize plate for Teel Rule Dies
  3. Laminating Unit​

Out-Feeder + Rewind Unit 

Max Paper Width：350mm 
Max Paper Diameter：700mm
  • Double rewind shaft
  • Glue heater unit
  • Matrix rewind
  • Slitting unit：6 sets of kinfe
  • Waste remove suction device
  • Meter counter
  • Label counter
Main control Panel with all units informations, 
Ink-Key data, register control...etc…
Option：
  1. Digital printing device space
  2. Label shifting unit
  3. Air shaft：ϕd：25mm
  4. Air shaft：ϕd：76mm
  5. Web monitor system

UV dryer

UV Light

Dampening&Cooling system

Technotrans Alpha.C