LINK LABEL MACHINERY CO LTD
  • LINK 330
  • Rotary
    • 300
    • 320
    • 360
    • Compare
  • Flat-bed
    • 170
    • 300
    • 320
    • 400
    • Compare
  • Screen
  • Sheeter
  • Winders
  • Contact us
  • 聯藝330
  • 輪轉設備
    • 300
    • 320
    • 360
    • 機型比較
  • 平壓設備
    • 170
    • 300
    • 320
    • 400
    • 機型比較
  • 網印機
  • 裁紙機
  • 收送紙機
  • 聯繫我們

LINK 250

Letter-Press / Flexo / Varnish / Die-Cut / 
LINK250 is an intermittent roll to roll printing and finishing machine with paper width under 250mm.
It is highly customize system, for example:
1. Unwind + Die-Cut + Rewind
2. Unwind + Flexo/Varnish + Rewind
3. Unwind + Flexo/Varnish + Die-Cut + Rewind
4. Unwind + Letter-Press * 4 + Rewind
5. Unwind + Flexo/Varnish + LetterPress * 6 + Flexo/Varnish + Die-Cut + Rewind

Features:
※The most economical conventional printing process for small runs label
※One cylinder size meets most requirements of label printing and fishing works
※Minimum space needed for all the accessory items
※Stable production with highest printing quality
※Fast set up and few waste
※Quick cleaning system
※Automatic lubrication system
※Shaftless independently servo control system
※Backlash free in/out feeder with direct drive motor system
※Touch screen operation
※One parameter tension control

If you are interesting with our LINK250, why don't you fill up our "LINK250 form" to let us know your requirement. We will soon reply you.
​LINK250 Form

Letter-Press

※ Max Print Width:250mm
※ Print Length:10~200mm
※ Plate Thickness:0.95mm
※ Double side tape size:0.12mm
※ Image ratio:97.92%
※ Changeable print cylinder
※ X,Y,T position adjustment function
Option:
  1. Print cylinder
  2. Remote ink-key control system
  3. Length direction servo-motor positioning system
  4. Register control system( option 3 needed )
  5. Auto washing function
  6. Ink roller with individual motor

Flexo/Varnish

※ Max Print Width:250mm
※ Print Length:10~200mm
※ Plate thickness:0.95mm
※ Double side tape size:0.12mm
※ Image ratio:97.92%
※ Changeable print cylinder
※ ​X,Y,T position adjustment function
Option:
  1. Print cylinder
  2. Anilox roller
  3. Length direction servo-motor positioning system
  4. ​Register control system( option 4 needed )

Rotary Die-Cut

※ Die-Cut width:250mm
※ Die-Cut length:10~200mm
※ Die thickness:0.44T
※ Gear Teeth:79T
※ X,Y,T position adjustment function
※ ​Die-cut pressure adjustment function
Option:
  1. Length direction servo-motor positioning system
  2. ​Register control system( option 1 needed )​

Unwind + In-Feeder Unit

※ Max Paper Width:250mm
※ Air shaft diameter:76mm
※ Max Paper Diameter:700mm
※ Suction loop box
※ Servo-motorize paper shaft tension control
※ ​Register control device( 2nd-pass system )
Option:
  1. Full tension control paper loop(with web guide)
  2. Silicon anti-glue device
  3. Dust suction device
  4. CORONA device
  5. Slitting unit with 2 slitter
  6. Waste remove suction device
  7. Dust remove roller system
  8. ​Digital printing device space

Out-Feeder + Rewind Unit 

※ Max Paper Width:250mm
※ Air shaft diameter:76mm
※ Max Paper Diameter:700mm
※ Suction loop box
※ ​Servo-motorize paper shaft tension control
Option:
  1. Full tension control paper loop​(without web guide)
  2. Glue heater unit
  3. Non-backing paper lamination unit
  4. Backing paper lamination unit
  5. Slitting unit with 6 slitters
  6. Waste remove suction device
  7. Web monitor system
  8. Single rewind shaft( Max diameter:0.5m )
  9. Double rewind shaft( Max diameter:0.5m )
  10. Quick shaft change system( Max diameter:0.3m )
  11. Digital printing device space
  12. Label shifting device

UV dryer

UV Light

About us / Link 330 / Semi-Rotary / Flat-Bed / Screen / Sheeter / Winders / Contact us
關於我們 / 聯藝 330 / 輪轉設備 / 平壓設備 / 網版機 / 裁紙機 / 複捲設備 / 聯絡我們